How to build a Poker Table in Australia
6 posts
• Page 1 of 1
How to build a Poker Table in Australia
Fellow Aussies
If you're thinking about building your own Poker Table, check out the detailed instructions set out by Paul Cherry at http://www.poker.com/building-a-poker-table.htm. Not sure whether I'm up to it myself just yet, but there might be a few others out there that are a little more handy than I am!
Cheers and beers . . . . . TwoBob
If you're thinking about building your own Poker Table, check out the detailed instructions set out by Paul Cherry at http://www.poker.com/building-a-poker-table.htm. Not sure whether I'm up to it myself just yet, but there might be a few others out there that are a little more handy than I am!
Cheers and beers . . . . . TwoBob
- TwoBob
- Posts: 16
- Joined: Wed Jul 14, 2004 4:26 am GMT
- Location: Sydney, Australia
ORGrinder wrote:now do these table plans only work if you're in australia?
Yeah, it's cuz the water goes down the drain backwards there. :D
-

Sean_in_NJ - Posts: 3340
- Joined: Fri Jan 02, 2004 5:57 pm GMT
- Location: New jersey
Nah, its because the water goes down the drain THE RIGHT WAY here! :D
And just in case you didn't follow the link above, you'll see that it's a particulary good set of instructions as it provides details on where to buy the materials in Australia. But I'm sure you'll be able to adapt the instructions and find supplies in your own home town. Or can you???
Cheers and beers . . . . . . TwoBob
And just in case you didn't follow the link above, you'll see that it's a particulary good set of instructions as it provides details on where to buy the materials in Australia. But I'm sure you'll be able to adapt the instructions and find supplies in your own home town. Or can you???
Cheers and beers . . . . . . TwoBob
- TwoBob
- Posts: 16
- Joined: Wed Jul 14, 2004 4:26 am GMT
- Location: Sydney, Australia
Well have started building table, awesome post TwoBob, will try to post a photo of table when completed
- kingballsy
- Posts: 2
- Joined: Mon Oct 18, 2004 3:13 am GMT
Table is complete. fair bit of work involved but the end product is amazing. Everyone who has used the table is just blown away bu how much better it is than using normal table.
Here is link to some photos of finished product
http://home.aanet.com.au/anugawela/one.htm
Here is link to some photos of finished product
http://home.aanet.com.au/anugawela/one.htm
- kingballsy
- Posts: 2
- Joined: Mon Oct 18, 2004 3:13 am GMT
6 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 0 guests

